S550 M1 Push To Start Button Overlay

• This premium air-release vinyl overlay is intended for the OEM push-to-start button on the 2021- 2023 M1 S550

Please Note: - Vinyl colors are NOT a 100% exact match to OEM paint/accents

• *Some example pictures displayed are computer edits and may not be an accurate representation of the actual vinyl color in person. Nonetheless, we aim to provide the closest color matches possible*

*Fighter Jet Gray orange color selection*

• If color match is your priority, select Twister Orange. If you want to match the appearance of the OEM reflective accents, select reflective orange

All vehicle names and model references are used solely for compatibility and identification purposes. These vinyl products are independently designed to personalize and enhance the visual appearance of your vehicle. 

• Clean/prep the surface with at least 91% isopropyl alcohol; gloves are recommended to avoid body oils from our hands interfering with the vinyl's adhesion. 
• Peel the vinyl from the paper backing (Dry installation)
• Line up the square cut out to the square light up light, apply pressure to tack down that area
• Begin to seal the vinyl from the center to the outer edges. The vinyl has air-release technology for an easy bubble-free installation. 
• Once you're at the outer edge, briefly heat up the area with a heat gun to shrink the vinyl, and then proceed by tucking in the edges with a corner tool squeegee (Highly recommended) until the button is fully wrapped.

• Limited-lifetime warranty against discoloration, bubbling and peeling due to defective film 

• One "M1" vinyl overlay